Referencias

1- Ajienka, J.A., Ogbe, N.O., and Ezeaniekwe, B.C. 1993. Measurement of dielectric constant of oilfield emulsions and its application to emulsion resolution. J. Pet. Sci. Eng. 9 (4): 331-339. http://dx.doi.org/10.1016/0920-4105(93)90063-K.
2- American Petroleum Institute. 2000. Overview of exploration and production waste volumes and waste management practices in the United States. URL http://www.api.org/aboutoilgas/sectors/explore/waste-management.cfm
3- API RP-38, Recommended Practice for Biological Analysis of Subsurface Injection Waters. 1975. Washington, DC: API.
4- API RP-45, Recommended Practice for Analysis of Oilfield Waters, third edition. 1998. Washington, DC: API.
5- Arnold, K. and Stewart, M. 1991. Surface Production Operations. In Design of Oil-Handling Systems and Facilities, Vol. 1, Ch. 7. Houston, Texas: Gulf Publishing Co.
6- Aske, N., Kallevik, H., and Sjöblom, J. 2002. Water-in-crude oil emulsion stability studied by critical electric field measurements. Correlation to physico-chemical parameters and near-infrared spectroscopy. J. Pet. Sci. Eng. 36 (1–2): 1-17. http://dx.doi.org/10.1016/S0920-4105(02)00247-4
7- ASTM D-96-88 (withdrawn 2000), Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Field Procedure). 1988. West Conshohocken, Pennsylvania: ASTM.
8- ASTM D-3230-05, Test Method for Salts in Crude Oil (Electrometric Method). 2005. West Conshohocken, Pennsylvania: ASTM.
9- ASTM D-4007-02, Standard Test Methods for Water and Sediment in Crude Oil by Centrifuge Method (Laboratory Procedure). 2002. West Conshohocken, Pennsylvania: ASTM.
10- ASTM D-3230-05, Test Method for Salts in Crude Oil (Electrometric Method). 2005. West Conshohocken, Pennsylvania: ASTM.
11- Aveyard, R., Binks, B.P., Fletcher, P.D.I. et al. 1990. The resolution of water-in-crude oil emulsions by the addition of low molar mass demulsifiers. J. Colloid Interface Sci. 139 (1): 128-138. http://dx.doi.org/http://dx.doi.org/10.1016/0021-9797(90)90450-3.
12- Bhardwaj, A. and Hartland, S. 1994. Dynamics of Emulsification and Demulsification of Water in Crude Oil Emulsions. Ind. Eng. Chem. Res. 33 (5): 1271-1279. http://dx.doi.org/10.1021/ie00029a025.
13- Berger, P.D., Hsu, C., and Arendell, J.P. 1988. Designing and Selecting Demulsifiers for Optimum Field Performance on the Basis of Production Fluid Characteristics. SPE Prod Eng 3 (4): 522- 526. SPE-16285-PA. http://dx.doi.org/10.2118/16285-PA.
14- Bobra, M. 1990. A Study of the Formation of Water-in-Oil Emulsions. Proc., 1990 Arctic and Marine Oil Spill Program Technical Seminar, Edmonton, Canada.
15- Brondel, D. et al. 1994. Corrosion in the Oil Industry. Oilfield Review (April): 4.
16- Callaghan, I.C., McKechnie, A.L., Ray, J.E. et al. 1985. Identification of Crude Oil Components Responsible for Foaming. SPE J. 25 (2): 171–175. SPE-12342-PA. http://dx.doi.org/10.2118/12342-PA.
171- Carios, E., Vega, L., Pardo, R., and Ibarra, J. 2013. Experimental Study of a Poor Boy Downhole Gas Separator Under Continuous Gas-Liquid Flow. Presented at the SPE Artificial Lift Conference-Americas, Cartagena, Columbia, 21-22 May 2013. SPE-165033-MS. http://dx.doi.org/10.2118/165033-MS.
18- Caudle, D.D. and Stephenson, M.T. 1988. The Determination of Water Soluble Organic Compounds in Produced Water. Report for the Offshore Operators Committee Task Force on Water Soluble Organic Compounds in Produced Water.
19- Chen, E.Y. and Ahmed, T. 1998. Why Internally Coated Piping Is Used for the World’s Largest Seawater Injection System. Presented at the SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 27-30 September 1998. SPE-49211-MS. http://dx.doi.org/10.2118/49211-MS.
20- Coatings and Linings for Immersion Service. 1998. NACE International, Houston, TPC No. 2.
21- Coppel, C.P. 1975. Factors Causing Emulsion Upsets in Surface Facilities Following Acid Stimulation. J Pet Technol 27 (9): 1060-1066. SPE-5154-PA. http://dx.doi.org/10.2118/5154-PA.
Ali, S.A., Durham, D.K., and Elphingstone, E.A. 1994. Test Identifies Acidizing Fluid/Crude Compatibility Problems. Oil & Gas J. 19 (13): 47.
22- Corrosion Control in Petroleum Production. 1979. NACE, Houston, TPC No. 5, Chap. 7.
23- Davies, G.A., Nilsen, F.P., and Gramme, P.E. 1996. The formation of Stable Dispersions of Crude oil and Produced Water: The Influence of Oil Type, Wax & Asphaltene Content. Presented at the SPE Annual Technical Conference and Exhibition, Denver, Colorado, 6-9 October 1996. SPE-36587-MS. http://dx.doi.org/10.2118/36587-MS.
24- Ditria, J.C. and Hoyack, M.E. 1994. The Separation of Solids and Liquids With Hydrocyclone-Based Technology for Water Treatment and Crude Processing. Presented at the SPE Asia Pacific Oil and Gas Conference, Melbourne, Australia, 7-10 November 1994. SPE-28815-MS. http://dx.doi.org/10.2118/28815-MS
25- Echaniz, C., Morales, C., and Pereze, T. 1998. The Effect of Microstructure on the KISSC Low Alloy Carbon Steels. Paper 120 presented at NACE Corrosion 98, Houston (March).
26- Efird, K.D. and Jasinski, R. 1989. Effect of Crude Oil on Corrosion of Steel in Crude Oil/Brine Production. Corrosion 45 (2): 165.
Jasinski, R. 1986. Corrosion of Low Alloy Steel in Crude Oil/Brine/CO 2 Mixtures. Proc., The Electrochemical Society: Surfaces, Inhibition and Passivation, Princeton, 86, No. 7, 139–148.
27- Eley, D.D., Hey, M.J., and Symonds, J.D. 1988. Emulsions of water in asphaltene-containing oils 1. Droplet size distribution and emulsification rates. Colloids Surf. 32 (0): 87-101. http://dx.doi.org/http://dx.doi.org/10.1016/0166-6622(88)80006-4.
28- Faucher, M. and Sellman, E. 1998. Produced water deoiling using disk stack centrifuges. Paper presented at the API Tech Chapter 1998 Produced Water Management Forum, Lafayette, Louisiana, November.
29- Flanigan, D.A., Stolhand, J.E., Shimoda, E. et al. 1992. Use of Low-Shear Pumps and Hydrocyclones for Improved Performance in the Cleanup of Low-Pressure Water. SPE Prod Eng 7 (3): 295-300. SPE-19743-PA. http://dx.doi.org/10.2118/19743-PA
30- Frankiewicz, Ted. 2012. Diagnosing and Resolving Chemical and Mechanical Problems in Produced Water Treating Systems. http://eo2.commpartners.com/users/spe/session.php?id=9339
31- Frenier, W., Hill, D., and Jasinski, R. 1994. Corrosion Inhibitors for Acid Jobs. Oilfield Review 1 (2): 15.
32- Gandhi, R. 2001. Storage Tank Bottom Protection Using Volatile Corrosion Inhibitors. Materials Performance—Supplement (January) 28.
33- Georgie, W.J., Bryne, K.H., and Kjaerland, G. 1992. Handling of Produced Water: Looking to the Future. Presented at the European Petroleum Conference, Cannes, France, 16-18 November 1992. SPE-25040-MS. http://dx.doi.org/10.2118/25040-MS
34- Georgie, Wally J. 2013. Foaming in Separators: Handling and Operation. http://eo2.commpartners.com/users/spe/session.php?id=10949
35- Hart, P. R. 2003. Removal of Water Soluble Organics from Produced Brine without Formation of Scale. Presented at the Society of Petroleum Engineers International Symposium on Oilfield Chemistry, 5-7 February, Houston, Texas, USA. SPE-80250-MS. http://dx.doi.org/10.2118/80250-MS
36- H.B. Bradley ed. 1987. Petroleum Engineering Handbook, 19-26. Richardson, Texas: SPE.
37- Heijckers, Cris. 2012. Flow Conditioning Impact on Separations. http://eo2.commpartners.com/users/spe/session.php?id=9426
38- Hirschberg, A., deJong, L.N.J., Schipper, B.A. et al. 1984. Influence of Temperature and Pressure on Asphaltene Flocculation. SPE J. 24 (3): 283–293. SPE-11202-PA. http://dx.doi.org/10.2118/11202-PA
39- Houchin, L.R. and Hudson, L.M. 1986. The Prediction, Evaluation, and Treatment of Formation Damage Caused by Organic Deposition. Presented at the SPE Formation Damage Control Symposium, Lafayette, Louisiana, 26-27 February 1986. SPE-14818-MS.
40- Isaacs, E.E., Huang, H., Babchin, A.J. et al. 1990. Electroacoustic method for monitoring the coalescence of water-in-oil emulsions. Colloids Surf. 46 (2): 177-192. http://dx.doi.org/10.1016/0166-6622(90)80164-Y.
41- Jones, T.J., Neustadter, E.L., and Whittingham, K.P. 1978. Water-In-Crude Oil Emulsion Stability And Emulsion Destabilization By Chemical Demulsifiers. J Can Pet Technol 17 (2). PETSOC-78-02-08. http://dx.doi.org/10.2118/78-02-08.
42- Kawanaka, S., Park, S.J., and Mansoori, G.A. 1991. Organic Deposition From Reservoir Fluids: A Thermodynamic Predictive Technique. SPE Res Eng 6 (2): 185-192. SPE-17376-PA. http://dx.doi.org/10.2118/17376-PA
43- Kimbler, O.K., R.L. Reed, A., and Silberberg, I.H. 1966. Physical Characteristics of Natural Films Formed at Crude Oil-Water Interfaces. SPE J. 6 (2): 153-165. SPE-1201-PA. http://dx.doi.org/10.2118/1201-PA.
44- Kokal, S. and Al-Juraid, J. 1998. Reducing Emulsion Problems By Controlling Asphaltene Solubility and Precipitation. Presented at the SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 27-30 September 1998. SPE-48995-MS. http://dx.doi.org/10.2118/48995-MS.
45- Kokal, S. and Al-Juraid, J. 1999. Quantification of Various Factors Affecting Emulsion Stability: Watercut, Temperature, Shear, Asphaltene Content, Demulsifier Dosage and Mixing Different Crudes. Presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, 3-6 October 1999. SPE-56641-MS. http://dx.doi.org/10.2118/56641-MS.
46- Kokal, S.L. and Sayegh, S.G. 1995. Asphaltenes: The Cholesterol of Petroleum. Presented at the Middle East Oil Show, Bahrain, 11-14 March 1995. SPE-29787-MS. http://dx.doi.org/10.2118/29787-MS.
47- Kokal, S. and Wingrove, M. 2000. Emulsion Separation Index: From Laboratory to Field Case Studies. Presented at the SPE Annual Technical Conference and Exhibition, Dallas, Texas, 1-4 October 2000. SPE-63165-MS. http://dx.doi.org/10.2118/63165-MS.
48- Krawczyk, M.A., Wasan, D.T., and Shetty, C. 1991. Chemical demulsification of petroleum emulsions using oil-soluble demulsifiers. Ind. Eng. Chem. Res. 30 (2): 367-375. http://dx.doi.org/10.1021/ie00050a014.
49- Krueger, J. 1982. Passivity and Breakdown of Passivity. Electrochemistry in Industry, Ch. 5, 317-330, ed. U. Landau, E. Yeager, and D. Kortas. New York City: Plenum Press.
50- Leontaritis, K.J. 1989. Asphaltene Deposition: A Comprehensive Description of Problem Manifestations and Modeling Approaches. Presented at the SPE Production Operations Symposium, Oklahoma City, Oklahoma,
13-14 March 1989. SPE-18892-MS. http://dx.doi.org/10.2118/18892-MS.
51- Leontaritis, K.J. 1989. Asphaltene Deposition: A Comprehensive Description of Problem Manifestations and Modeling Approaches. Presented at the SPE Production Operations Symposium, Oklahoma City, Oklahoma, 13-14 March 1989. SPE-18892-MS. http://dx.doi.org/10.2118/18892-MS
52- Levine, S. and Sanford, E. 1985. Stabilisation of emulsion droplets by fine powders. The Canadian Journal of Chemical Engineering 63 (2): 258-268. http://dx.doi.org/10.1002/cjce.5450630211.
53- Linne, C. 1998. Heavy Wall Casing in C-110 Grade for Sour Service. Paper 117 presented at NACE Corrosion 98, Houston (March).
54- L.L. Schramm ed. 1992. Emulsions: Fundamentals and Applications in the Petroleum Industry, Advances in Chemistry Series No. 231. Washington, DC: American Chemical Society.
55- L. T. Popoola, A.S. Grema, G.K. Latinwo, B. Gutti, A.S. Balogun, 2013, Corrosion problems during oil and gas production and its mitigation, International Journal of Industrial Chemistry, http://www.industchem.com/content/4/1/35
56- Manek, M.B. 1995. Asphaltene Dispersants as Demulsification Aids. Presented at the SPE International Symposium on Oilfield Chemistry, San Antonio, Texas, 14-17 February 1995. SPE-28972-MS. http://dx.doi.org/10.2118/28972-MS.
57- Marquez-Silva, R.L., Key, S., Marino, J. et al. 1997. Chemical Dehydration: Correlations between Crude Oil, Associated Water and Demulsifier Characteristics, in Real Systems. Presented at the International Symposium on Oilfield Chemistry, Houston, Texas, 18-21 February 1997. SPE-37271-MS. http://dx.doi.org/10.2118/37271-MS.
58- Matar, Omar K. 2013. Defoaming Additives in Horizontal Multiphase Flow—Impact on Flow Regime and Separations. http://eo2.commpartners.com/users/spe/session.php?id=11417
59- McClaflin, G.G. and Whitfill, D.L. 1984. Control of Paraffin Deposition in Production Operations. J Pet Technol 36 (11): 1965-1970. SPE-12204-PA. http://dx.doi.org/10.2118/12204-PA
60- Menon, V.B., Nikolov, A.D., and Wasan, D.T. 1988. Interfacial Effects of Solids-Stabilized Emulsions: Measurements of Film Tension and Particle Interaction Energy. J. of Colloid and Interface Science 124 (1): 317-327. http://dx.doi.org/10.1016/0021-9797(88)90353-0.
61- Menon, V.B. and Wasan, D.T. 1987. Particle—fluid interactions with applications to solid-stabilized emulsions Part III. Asphaltene adsorption in the presence of quinaldine and 1,2-dimethylindole. Colloids Surf. 23 (4): 353-362. http://dx.doi.org/10.1016/0166-6622(87)80276-7.
62- Miller, D.J. and Böhm, R. 1993. Optical studies of coalescence in crude oil emulsions. J. Pet. Sci. Eng. 9 (1): 1-8. http://dx.doi.org/10.1016/0920-4105(93)90023-8.
63- Mitchell, D.L. and Speight, J.G. 1973. The solubility of asphaltenes in hydrocarbon solvents. Fuel 52 (2): 149-152. http://dx.doi.org/10.1016/0016-2361(73)90040-9.
64- Mohammed, R.A., Bailey, A.I., Luckham, P.F. et al. 1994. The effect of demulsifiers on the interfacial rheology and emulsion stability of water-in-crude oil emulsions. Colloids Surf., 91 (3 November): 129-139. http://dx.doi.org/http://dx.doi.org/10.1016/0927-7757(94)02840-0.
65- Monger, T.G. and Fu, J.C. 1987. The Nature of CO2-Induced Organic Deposition. Presented at the SPE Annual Technical Conference and Exhibition, Dallas, Texas, 27-30 September 1987. SPE-16713-MS.
66- Monger, T.G. and Trujillo, D.E. 1991. Organic Deposition During CO2 and Rich-Gas Flooding. SPE Res Eng 6 (1): 17-24. SPE-18063-PA. http://dx.doi.org/10.2118/18063-PA
Browne, S.V., Ryan, D.F., Chambers, B.D. et al. 1995. Simple Approach to the Cleanup of Horizontal Wells With Prepacked Screen Completions. J Pet Technol 47 (9): 794-800. SPE-30116-PA. http://dx.doi.org/10.2118/30116-PA
67- Moore, E.W., Crowe, C.W., and Hendrickson, A.R. 1965. Formation, Effect and Prevention of Asphaltene Sludges During Stimulation Treatments. J Pet Technol 19 (9): 1023-1028. SPE-1163-PA. http://dx.doi.org/10.2118/1163-PA.
68- Mowat, D.E., Edgerton, M.C., and Wade, E.H.R. 2001. Erskine Field HPHT Workover and Tubing Corrosion Failure Investigation. Presented at the SPE/IADC Drilling Conference, Amsterdam, 27 February–1 March. SPE-67779-MS. http://dx.doi.org/10.2118/67779-MS.
69- NACE TM0374-2001, Standard Test Method Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems). 2001. Houston: NACE.
70- Neff, J.M. and Stout, S. 2002. Predictors of Water-Soluble Organics (WSOs) in Produced Water—A Literature Review. Washington, DC: API.
71- Newberry, M.E. and Barker, K.M. 1985. Formation Damage Prevention Through the Control of Paraffin and Asphaltene Deposition. Presented at the SPE Production Operations Symposium, Oklahoma City, Oklahoma, 10-12 March 1985. SPE-13796-MS. http://dx.doi.org/10.2118/13796-MS
72- Nice, P. and Ueda, M. 1998. The Effect of Microstructure and Chromium Alloying Content to the Corrosion Resistance of Low-Alloy Steel Well Tubing in Sea Water Injection Service. Paper 3 presented at NACE Corrosion 98, Houston (March).
73- Oil-Water Separator Process Design. 1975. Manual on Disposal of Refinery Wastes, Volume on Liquid Wastes, Ch. 5. Dallas, Texas: API.
74- OSHA Technical Manual (OTM), Section IV: Chapter 2 https://www.osha.gov/dts/osta/otm//otm_iv_2.html
75- P. Ramirez, September 2009, USF&W, Cheyenne, Wyo., http://www.fws.gov/mountainprairie/contaminants/documents/reservepits.pdf
76- Roberts, J.R., Basurto, E.R., and Chen, P.Y. 1966. Slosh Design Handbook I, NASA-CR-406, Contract No. NAS 8-11111. Huntsville, Alabama: Northrop Space Laboratories.
77- Rye, S.E. and Marcussen, E. 1993. A New Method for Removal of Oil in Produced Water. Presented at the Offshore Europe, Aberdeen, United Kingdom, 7-10 September 1993. SPE-26775-MS. http://dx.doi.org/10.2118/26775-MS
78- Schubert, H. and Armbroster, H. 1992. Principles of Formation and Stability of Emulsions. Intl. Chem. Eng. 32 (1): 14.
79- Singh, B.P. 1994. Performance of Demulsifiers: Prediction Based on Film Pressure Area Isotherm and Solvent Properties. Energy Sources 16 (3): 377-385. http://dx.doi.org/10.1080/00908319408909084.
80- Sjöblom, J., Söderlund, H., Lindblad, S. et al. 1990. Water-in-crude oil emulsions from the Norwegian continental shelf. Colloid Polym. Sci. 268 (4): 389-398. http://dx.doi.org/10.1007/bf01411682.
81- Sjöblom, J., Urdahl, O., Høiland, H. et al. 1990. Water-in-crude oil emulsions. Formation, characterization, and destabilization. In Surfactants and Macromolecules: Self-Assembly at Interfaces and in Bulk, B. Lindman, J.B. Rosenholm, and P. Stenius, 82, 18, 131-139. Progress in Colloid & Polymer Science, Steinkopff. http://dx.doi.org/10.1007/BFb0118251.
82- Salager, J.L. 1990. The Fundamental Basis for the Action of a Chemical Dehydrant: Influence of Physical and Chemical Formulation on the Stability of an Emulsion. Intl. Chemical Engineering 30 (1): 103.
83- Schantz, S.S. and Stephenson, W.K. 1991. Asphaltene Deposition: Development and Application of Polymeric Asphaltene Dispersants. Presented at the SPE Annual Technical Conference and Exhibition, Dallas, Texas, 6-9 October 1991. SPE-22783-MS. http://dx.doi.org/10.2118/22783-MS
http://petrowiki.org/Formation_damage_from_paraffins_and_asphaltenes
84- Smart, J.S. 2001. Wettability—A Major Factor in Oil and Gas Corrosion. Materials Performance 40 (4): 54.
85- Stephenson, M.T. 1992. Components of Produced Water: A Compilation of Industry Studies. J Pet Technol 44 (5): 548-550, 602-603. SPE-23313-PA. http://dx.doi.org/10.2118/23313-PA
86- Strassner, J.E. 1968. Effect of pH on Interfacial Films and Stability of Crude Oil-Water Emulsions. J Pet Technol 20 (3): 303-312. SPE-1939-PA. http://dx.doi.org/10.2118/1939-PA.
87- Svetgoff, J.A. 1989. Demulsification Key to Production Efficiency. Petroleum Engineer Intl. 61 (8): 28.
88- Szklarska-Smialowska, Z.: Pitting Corrosion of Metals. 1986. NACE, Houston, 69–96.
89- Tambe, D.E. and Sharma, M.M. 1993. Factors Controlling the Stability of Colloid-Stabilized Emulsions: I. An Experimental Investigation. J. Colloid Interface Sci. 157 (1): 244-253. http://dx.doi.org/10.1006/jcis.1993.1182.
90- Thomas, D.C. 1988. Selection of Paraffin Control Products and Applications. Presented at the International Meeting on Petroleum Engineering, Tianjin, China, 1-4 November 1988. SPE-17626-MS. http://dx.doi.org/10.2118/17626-MS
91- Treseder, R. and Badrak, R. 1997. Effect of Cold Working on SSC Resistance of Carbon and Low Alloy Steels—A Review. Paper 21 presented at NACE Corrosion 97, Houston (March).
92- Treseder, R. and Tuttle, R. 1998. Corrosion Control in Oil and Gas Production. Item No. 37741, NACE, Houston.
93- Warren, K.W. 1993. Reduction of Corrosion through Improvements in Desalting. Paper presented at the Benelux Refinery Symposium, Lanaken, Belgium, 2–3 December.
94- Yang, M., Stewart, A.C., and Davies, G.A. 1996. Interactions Between Chemical Additives and Their Effects on Emulsion Separation. Presented at the SPE Annual Technical Conference and Exhibition, Denver, Colorado, 6-9 October 1996. SPE-36617-MS. http://dx.doi.org/10.2118/36617-MS.
95- Yen, T.F. 1974. Structure of Petroleum Asphaltene and Its Significance. Energy Sources 1 (4): 447.
96- Zain, Z.M. and Sharma, M.M. 1999. Cleanup of Wall-Building Filter Cakes. Presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, 3-6 October 1999. SPE-56635-MS. http://dx.doi.org/10.2118/56635-MS
97- http://petrowiki.org/Stability_of_oil_emulsions
98- http://petrowiki.org/Oil_viscosity
99- http://petrowiki.org/Oil_demulsification
100- http://petrowiki.org/Removing_hydrocarbons_from_water
101- http://petrowiki.org/Desalting
102- http://petrowiki.org/Water_treating_chemicals
103- http://petrowiki.org/Corrosion_problems_in_production
104- http://petrowiki.org/Oil_and_gas_separators